How to Lay Ceramic or Porcelain Floor Tiles – Part 4

Part 4 of this guide is where you get to finally see what you have been working towards. Here we will cover the laying of the adhesive (also known as mastic) and the actually method of laying tiles. We will also deal with the method used to apply the grout (known as grouting).

Now, put all your tiles to the side and start spreading the mastic with the notched trowel. Again, only work in one quadrant and always start at the center point. Follow the pattern you set in the rehearsal which follows the floor tile designs that you made. Spread the adhesive evenly and using the notched edge of the trowel, make a raking motion. The grooves you make should neither be too shallow, nor should they be too deep. Set your first tile at the corner of the center point, pushing it firmly but lightly. Set the tile spacer and continue. Always remember to set tile spacers after each and every tile so that the tiles do not look like they have been placed unevenly.

Use your level to make sure the level of the tiles are all equal. Despite your prep work, not all surfaces are equal and this is the last chance you will have to make sure everything is as perfect as possible before you complete your perfect floor tile design. If the level is uneven, you can adjust it by adding more force to the tile or in the opposite case, adding more adhesive to make it higher. This will help you keep everything level. Once you have finished off the quadrant, proceed to remove the tile spacers so that they do not set into the adhesive. Follow this process until all four remaining quadrants are finished. Always make sure that you check the level as you go along. Caution is paramount.

Now what you have to do is wait. It is recommended to wait at least one day (or at the very least overnight) for the adhesive to dry, or cure, before you start adding the grout to the joints.

Once the days waiting has finished, you can begin adding the grout to the joints. Using a rubber float, apply enough grout to be able to work with it, but never ever too much. Do this as you have done everything so far, one quadrant at a time. Diagonally press grout into joints to an even level with the tile. Skim the excess grout from the tile with the rubber float. You will notice a slight “grout haze” on your tiles. Repeat this process on the remaining 3 quadrants.

The wall joints and floor interface is best filled with caulk. The main benefit to using caulk instead of grout in the wall joints is due to the contracting and expanding nature of tiles. You do not want a crack in your floor tile design, so best use caulk. Caulk will act as a buffer to expansion and contraction due to changes in the temperature.

Are you ready to learn all about floor tiles ? Visit www.houston-tile.com to find out everything you need to know!

An Introduction to Ceramic Tiles

The first forms of Ceramic Tiles go back to the ancient era, when the use of clay-based as a developing material was designed individually in several early societies. The precursors of recent Ceramic Tiles were approximately formed and not nearly as strong as Ceramic Tiles these days. The material was dug from Archaeological dug sites, approximately established into foundations, and baked dry in the sun. The first Ceramic Tiles were raw, but even 6,000 years ago people were designing them by including pigmentation for shade and chiseling low-relief designs into their areas.
Firing Tiles
The historical Egyptians were the first to discover that shooting clay-based Ceramic Tiles at warm ranges in a kiln created them more powerful and more water-resistant. Many historical societies also used slim pieces of heated clay-based as attractive elements in their structure.
Buildings in historical Mesopotamian places were fronted with unglazed terra-cotta and vibrant attractive Ceramic Tiles. Ancient Greeks and Romans used ceramics for the floors, rooftops, and even the water system in their structures. The China used white-colored clay-based called kaolin to develop the white-colored and resilient clay-based known as pottery.
Tiles in ancient Western countries were generally arranged for the areas of chapels. Across there are, the Byzantines done in using Ceramic Tiles at a small scale; they designed significant variety styles and paintings using Ceramic Tiles as well as pieces of glass and rock.
Glazing Tiles
Persian ceramicists, driven by used in Chinese pottery, designed an attractive custom that distribute across South Japan, North African-American, into the country with the Moors, and eventually throughout Western countries. Because their Islamic religious beliefs banned using human pictures in art, artisans turned to vibrant shaded Ceramic Tiles with decorative and connected styles.
Solid-color hard Ceramic Tiles were cut and constructed into large-scale mosaics with simple shade gradations. The Islamic artisans also designed steel oxide glazes using tin, ornithologist, cobalt, manganese, and antimony, which created Ceramic Tiles glazes more amazing and resilient.
By the 15th century, steel oxide-glazed Ceramic Tiles had become popular in Tuscany, and their style impact shifted northward with French artisans. Major Western trading facilities provided their titles to local style elements and kinds of Ceramic Tiles that are still used, such as delft Ceramic Tiles (from Delft in Holland), and majolica Ceramic Tiles (from Majorca in Spain).
Modern Tiles
Today, most commercial Ceramic Tiles producers use the pressed-dust technique of development. First, an assortment of substances is pushed into the preferred Ceramic Tiles shape. Then the Ceramic Tiles is hard (or left unglazed) and baked in a kiln. Some Ceramic Tiles Manufacturers may extrude Ceramic Tiles forms by compressing them through a press into a die or by moving them out flat and cutting the Ceramic Tiles with a form much like a standard.
Whatever the technique was all Ceramic Tiles must be heated to become resilient. The cleanliness of the clay-based, the number of firing, and the temperature of the kiln determine the quality and price. Kiln temperature ranges differ from about 900° F to 2500° F. Lower firing temperature ranges generate more permeable Ceramic Tiles and soft glazes; higher temperature ranges generate heavy, nonporous Ceramic Tiles and hard glazes.

Qutone Ceramic Pvt Ltd is leading manufacturer of Ceramic wall tiles, Ceramic bathroom tiles, Ceramic tiles, Ceramic Kitchen tiles in Delhi, India.

Beautiful Ceramic Tile – Bloomington MN

When you go shopping at your Bloomington, MN floor store, you will find that tile has become so popular that there are dozens of new patterns, sizes, and colors. Years ago you only saw tile on bathroom floors; little one inch tiles surrounded by larger ones. They then moved up the walls when showers got popular.

When you check out the flooring in Bloomington, MN, you will discover that there are now narrow, long, one inch strips for accent, finishing, and striping, to square tiles that can be 3″, 5″, 12″, 24″, and more.

Larger tiles are good for the floor in large rooms, such as kitchens, family rooms, bedrooms, and dining rooms. Otherwise you end up with too much grout and too little tile…a busy look. Smaller tiles are good for use as kitchen backsplashes, kitchen and bathroom counters, and small floors or shower walls in bathrooms.

So if you are considering ceramic tile, Bloomington, MN is a good starting point. But you need to consider cost, pattern style, color, and installation. Ceramic tile is made the way pottery is made. It is formed from clay, glazed, and fired in very hot ovens under extreme temperatures. It is not difficult to install, but it needs to be learned, and is rather time consuming.

At your Bloomington, MN floor store, you will learn everything you need to know to make a wise decision regarding who does the installing, whether it is you or a professional. One way or the other, you will be glad you decided to get tile. It is durable, adds a wonderful touch to most styles of décor, and is very easy to clean.

When you buy your flooring in Bloomington, MN, the salesman will also tell you about the cons to having this type of tile. If something breakable, like a glass or dish, is dropped on a ceramic floor, it will usually shatter. When ceramic tile is wet it can be very slippery, so it is wise to have non slip throw rugs in front of sinks, bathtubs, and showers.

Another thing to consider is whether or not to get glazed tile. Glazed will have a harder finish and be stain resistant. Dull, unglazed tile (such as some of the Mexican tiles) is beautiful, but will suffer in areas where stains occur (such as counters).

You will be amazed at the many choices of color and pattern (almost endless) that you will find at your Bloomington, MN floor store. Racing stripes on floors, walls, or counters, to monograms, intricate patterns, checkerboards, or individual inlaid tiles like herbs and flowers are all available in tile.

Ceramic tile on your walls can be likened to matting and picture framing a work of art. But it is important to know all of the disadvantages to using this type of flooring which Bloomington, MN dealers will advise you. Ceramic floors do not retain warmth, and will be cold to the touch in winter, unless you have radiant heat.

Tile is also water resistant. It lasts well in high traffic areas, but can be hard on your feet if you stand on it for long periods of time. And while it takes just a damp mop to wash the tile, the grout can stain, chip, and even crumble. Installation is labor intensive, but the tile can last for decades.

Should you decide to install your own ceramic tile, Bloomington, MN dealers will be happy to give you detailed instruction before you begin.

Find out more about ceramic tile Bloomington MN. Get more information on Bloomington MN floor store and flooring Bloomington MN.

Installing Ceramic Tile Made Easy and Fun

I’m a residential contractor AND I have recently done a Do-It-Yourself home project of installing tile in my own home.
Here are a few reasons you can and should install tile in your home:

First, every time I walk into my bathroom that my wife and I tiled last summer I still enjoy the idea that we did it ourselves. There is great satisfaction in learning to do a craft and seeing the end result especially in your own home.

Second, we saved a great deal of money. About 50 to 65% of the cost of installing tile is in the labor. And quite frankly, professional tile installers would rather be doing larger, higher volume jobs than a bathroom in a home. So they are not going to do it unless they are paid well.

And finally, the project can be done on your own schedule and like you want it done. The job is going to make a mess of part of you home for a while and you need to be able to schedule it around your life, not a professional tile installer’s. Use your vacation, your spring break, etc. You also have the flexibility to make changes as you go.

Then, of course, there are reasons you should be cautious about doing the tiling installation yourself. Ask yourself these questions:

Do you have the time available to complete the job?

Have you made adequate plans on how you want the tile done and how it will look when finished?

Are you prepared with enough knowledge of installing tile to make it a real success?

An upgrade to your home by installing ceramic tile is a good investment. Especially if you do-it-yourself. Our personal bathroom project was well worth the effort. And we get to see and enjoy what we have done everyday. I know a lot people that have done similar projects with good results.

Our project was not without some pit falls, but we learned and over came them. And we are looking forward to doing more tiling in our home.

Jay Leger has been working in homes doing insurance repairs since 1999. Have concerns about knowing all the details of your tile project? There is more information at Installing Ceramic Tile.

Excellence Of Perfectly Crafted Ceramic Tile

The incorporation of wood looking ceramic tile into the home will surely be a perfect option for those who want to have a classic wooden look into the floor of their home and also to cut down the unwanted attributes. The appearance of these tiles resembles very much to the hardwood floors that delivers an aesthetic sense to your home. Depending on the users choice these porcelain tiles are available in different color tones along with the durability and the maintenance free features. The colors from which you can make the choice in these wood looking tiles are Beige, Ocean Blue and White.
As a buyer you will surely be looking for some prominent features that this ceramic tile possesses in it which will force you in buying of these tiles. Well!! You will surely get what you are looking for in this wooden flooring. The ceramic tile that looks like wood is certainly scratch resistant, mark resistant, moisture and strain resistant. These features will suddenly ensure the durability of these tiles and also take into account that these tiles last for a longer version of time. The wood look porcelain tile is obviously lot easier to clean. Thus maintenance is no more the problem when you install this wooden flooring into your home.
When talking about wood looking floor, the porcelain tile and the ceramic tile are the two main classes from which you may choose according to the choice and the need of your home. A part from this, you will also discover some classes in these tiles that look like Walnut, Mahagony, Wenge, Chesnet, Pecan, Oak, Cherry and also Hickory. There is a variety of different shades that you will also come to know depending on the series that you may choose. Some major brands that you might experience are Daltile, Hampton Collection and also Interceramic Timberland series.
Lets not forget the ease in the installation of this wood tile flooring. You can install it anywhere in your home with complete satisfaction and ease. These areas may well include TV lounge, kitchen, living room, bed room or anywhere you want to. Its simply an incredible material that will excite you to the maximum. Your guests will suddenly feel a great deal of respite on entering your home when they feel the beauty of such marvelous wood looking tiles. The material of these tiles is compact in nature and made with a great piece of art and perfection. Without going into the complications of actual wooden floor, now you can give your floor an exactly similar look as that of actual wood by the use of such porcelain tile that looks like wood.
The incorporation of ceramic tile in your home will surely enhance and upgrade the look of your place to a great extent.

Usman Wardag

Carpentry And Ceramic Tile Tips

Today the choice of floor and wall tiles is so varied, that any look you are going for can be achieved with tile. It is even giving hardwood flooring a run for the money, with wood-look ceramic tiles.

A quality tile surface will last the life of your house if properly maintained, so the initial expense will pay off over the years.

Here are a few things to keep in mind when considering ceramic tile:

– Ceramic tiles can be glazed or unglazed. Glazed tiles have a durable coating that is more water-resistant, fire-resistant, durable and easier to clean than non-glazed tiles.

– If the coldness of tile is a concern, tile can be installed over radiant heating for a wonderful warmth in bathrooms.

– Tile can be slippery when wet. For this reason, they come with a COF (Coefficient of Friction) rating between 0 and 1.0 the higher the rating, the more slip-resistant the surface. A test rating of about .6 is recommended for bathrooms.

– It is not always possible to get a perfect match after a tile is broken. Keep some spare tiles from the original installation.

– When choosing tile for high-traffic areas, such as hallways or entranceways, remember that ceramic tiles that are pale in colour with no minor grain or pattern can look dirty quickly.

Care and Maintenance Tips

– Clean with mild soap and water or vinegar and water.

– Avoid using harsh abrasives that can damage the glaze on the tiles.

– Replace old caulking and damaged grout.

Ceramic tile has another advantage over other flooring choices, such as carpeting it is hypo-allergenic and a good surface choice for homeowners with allergies.

Rich cornices, wide baseboards, detailed crown moulding, sculpted door frames are all within the reach of the average homeowner. In fact, few improvements have as dramatic an impact as adding rich architectural detail to your rooms with moulding. Here are some ways you can work moulding magic in your home:

1.Spruce up plain slab doors with new interior doors available in colonial, classic and conventry styles, to name just a few.

2.If your existing doors are good quality but plain, add interest with thin moulding designs to create a classic look. Many building centres sell prefabricated cutouts that can be simply glued to your existing door and painted or stained to match.

3.To unify the look, consider replacing all the trim in your home with new baseboards, window and door frames. The selection of traditional mouldings run the gamut from elaborate to simple, to suit every dcor. Keep the trim in the same pattern and finish throughout to make the rooms flow and provide continuity from room to room.

4.Transform a plain entrance door and add drama with pilasters and top shelves with pediments.

5.Add a touch of class to a plain drywall ceiling with the elegance of crown moulding.

6.Add crown moulding to dress up the tops of cabinets and shelves.

7.Run mouldings down the corners and face of cabinets to soften the squareness and add the illusion of depth.

8.Dress up the exposed side of cabinets by adding panel mouldings.

To keep your walls looking balanced, the baseboard should be the heaviest element, followed by crown moulding and then chair rails as the thinnest.

For home improvement solutions, check out Kitchen Renovation for more insight.

Ceramic Tile Sizes and Their Uses

It used to be that tile flooring was sold in a standard 12”x12” size which made measuring and shopping for tile easy and hassle free.  With new advances in modern design and interior décor, today’s tile now comes in a wide range of sizes, shades and colors.  While you can still find the standard 12”x12” tile blocks, you’ll also learn when shopping for ceramic tile that the only limit really is your imagination!  Here’s a closer look at the types of tile sizes available and when you’d use each type.

By the Case and By the Foot

Most tile is sold by the case and measured in square feet. You can easily determine the square footage for the room you’re looking to put tile in simply by measuring it, then adding 10% extra for waste and leftovers. In addition to the actual ceramic tile, you’ll also want to consider all the little accentuating pieces such as border caps, accent strips and decorative tile that will be used around the edges of the room. Mosaic tiles are slightly different in that they typically come in 2”x2” sections on what are called mesh mount sheets.  These sheets typically come in 12”x12” sizes but can vary if you have a specific shape in mind, like hexagon tile. Generally, however, you can take the measurements of the room and go to your ceramic tile flooring store to determine which types would be the best “fit”.

Larger Sizes Mean Easier Maintenance

For easier care and maintenance, many people choose larger tile, such as an 18”x18” section.  Not only does this eliminate a good bit of grout work (the “glue” that is found in between each individual tile), but it also cuts down on the installation time and cost.  Large tile can make a room appear to be larger, and it can also make the room easier to clean.  Ceramic tile is renowned for its durability – especially in moisture prone areas where humidity can ruin cheaper floors.  Kitchens and bathrooms especially benefit from tile and you can shop a flooring wholesaler to get a wide selection of choices from the top name brand manufacturers.  Entryways and porticos also look beautiful with new tile.  

Cleaning and Caring for Your New Tile Floors

Most of the time, ceramic tile can hold its own in any environment.  By following the manufacturer’s directions for cleaning, you can help your new investment last for years to come while looking just as good as it did on the day it was installed.  Obviously you’ll want to pad table and chair legs to prevent scratches, and avoid using harsh, abrasive cleaners like bleach or ammonia, which can discolor the grout.  Like any type of floor, you’ll want to clean up spills and stains quickly so they won’t stain the grout on your ceramic tile floor.  Otherwise, you can feel confident that you’ve made an excellent investment in your home that will provide you with years of durability.
 

Andrew White writes about ceramic tile and other home improvement topics out of Seattle. Always looking for the highest quality materials at the best price he tends to end up shopping at http://www.prosourcefloors.com more often than not.

The Fabulous Ceramic Tile For Your Home

Experience should guide you correctly to the greatest choice when it comes to things to use to make brighten your bathroom. The solution is certainly the Ceramic Tile due to its resistant, as well as very carefully designs. These kinds of floor tiles have been established for hundreds of years and their way of manufacture has been enhanced more and more.

Floorings appear to be the main part of a home and take a vital part to decorate rooms, hallways, and entire architectural structures as well. From attractive subtleties of glowing blue, green, dark colored or reddish colored, to soft, special colors like beige, mocha, cream, or yolk yellow-colored, the Ceramic Tile Floors need to harmonize with the furniture correctly so that you can create the specified appearance. It is not as resistant to external factors as the marbles are, but the ceramic is well cleaned that has a moist fabric, as its polished finish can make it almost not possible for dirt to adhere to it.

As far as charges go, the Ceramic Tile is perhaps on the list of most affordable materials, which you are able to opt for to adorn your rooms. There is almost nothing to mention about the quality, as all know its feature as well as look. In view of that, the resources are adequate to allow the selling price keep very low, and it is the main advantage for the buyer.

It is a fact that a good-looking home needs the perfect flooring, but it is quite hard to find out. However, if you analysis the concept of flooring methodically, then you could find that there are a number of floorings are available. Whenever you go into the market, then you can realize that there are lots of floorings are obtainable in the market. However, the fact is that a very few of those floorings are reliable, and for that reason, you are supposed to choose the suitable one, and this precise one is just what you need.

Everyone wants that his or her home to look amazing, but the problem rise during the selection of the floorings. It is mandatory to have nice flooring whether you have a good-looking house. In such case, this Ceramic Tile Floors play an awfully important role that cannot be ignored at any circumstance. As a result, bring home these amazing tiles and change the look of your home entirely.

Aaden Bell write about ceramic tile. Buy ceramic tile floors for flooring at discount prices from woodlooktiles.com

Ceramic Tile – A Versatile Material

When contemplating a new floor, you have an overwhelming amount of choices. Ceramic tile is only one of those options, but there are several qualities that set tile apart from the other flooring choices. Tile is especially adaptable and can be used in a variety of settings including kitchens, bathrooms, dining and living rooms. No matter the finish you’re after, there is a style to suit every taste.

Ceramic tile remains one of the most cost effective flooring materials available today. While the initial installation costs may be slightly higher, when investing in a new floor, it becomes quite clear that longevity is an essential aspect of the decision. Ceramic tile also requires limited upkeep, increasing its value even more. Its ability to resist wear makes it possible to use it in the highest traffic areas of the home. Resisting wear is ceramic’s strong point, not resisting impact. When tiles do break, repair is far simpler than with hardwood or plank flooring. Simply clear the area of broken pieces, reinstall a replacement, and re-grout the area.

Its adaptability and style is another draw. Your creativity is your only limitation. You need not limit your use of tile to flooring. Fireplace hearths, back splashes, porticos, countertops and outdoor applications are a few different examples of other places ceramic tile can be used. The variety of textures, finishes, colors and sizes makes tile one of the most versatile materials. From smooth to ridged, matte or shiny, any color you can imagine and sizes ranging from 6″ x 6″ to 24″ x 24″ and everything in between, you could use tile for your whole house and not see a repeat! Once you choose your favorite variety of tile and the pattern you wish to create, if any, the installation process is easy to complete. Basically, you prep the area, gauge the space, install the tile, and grout the finished project.

When making home improvements or designing your home from the start, capital improvement is always something to keep in mind. Usually, adding a tile floor to your home will increase the future resale value significantly. Potential buyers will surely notice the presence of a well installed and designed ceramic tile floor. With its attractive style, durability and impressive presentation, a well done tile floor could potentially add thousands of dollars in value to your home. While the home is yours, you will certainly not regret the decision to install ceramic tile floor.

Bruce Mendes has been in the high end trade for over 15 years. His experience is in flooring and cabinetry. He has a high end tile and glass showroom in Powell, Ohio and an online presence at My Tile Backsplash

How to Choose Ceramic Tiles

Whether you’re thinking about retiling your bathroom or kitchen or you’ve just bought your first home and need to do some tile renovation, consider these following tips in your decision-making. They’ll help save you time, effort, and money.

1. Choose the size of tile that will best suit the room you’re tiling. Tiles come in various sizes, as small as 1-inch squares that come attached on a single sheet. Other sizes are 12-inch squares and 18-inch squares; tiles even as large at 24-inches are available as well. All tiles should be consistent in size for aesthetic purposes.

2. Figure out the price range that will best fit your budget. Factor in how much space you’re actually tiling and do some calculations. Tile prices will range from less to $ 1 to several dollars per tile or per square foots, depending on tile size and type. Consider purchasing higher quality ceramic or even glass tiles for longer lasting results and better durability.

3. Select the ceramic tile according to the characteristics of the tile. Porcelain title is strong and durable because it is fired at extreme temperatures in a kiln, similarly to pottery items. Mosaic tile is made from clay and resists moisture and does not chip easily. Quarry tile is made from a mixture of clay and is available in shares of gray, brown and red.

4. Depending on what you’re using the tile for (bathroom, kitchen, decorative, etc.), determine the amount of traffic the tile will be exposed to. High gloss tiles are slippery when wet and should not be used in entryways. Hand-painted glazed tiles are very beautiful, but the glaze is only on the surface of the tile and if chipped, will reveal the color inside, not the glaze. Porcelain tile is extremely durable and is ideal for high-traffic ideas.

5. Variations in shades are listed on the back of every sample tile. “Low” tiles will have a consistent shade and texture; “moderate” will be a slight variation in shade and texture; and finally “high” means a great possibility of inconsistencies. “Random” is the greatest risk of shade and texture variety.

6. Choose what you like. You can always take samples, hang them on your wall, or place it on the floor and see what best suits your style, personality, and needs. Don’t settle until you find the perfect ceramic tile. There are many possibilities to explore, sometimes choosing what you like is the best alternative

7. Tiles can fit any dcor, any room, any style, and any lifestyle. Tiles can brighten up an other wise dull room, provide practical and visually pleasing alternatives, and so much more.

8. Ask your friends what types of tiles they’ve used before, sometimes word of mouth is the best way to figure out what works in a home.

www.BuyTile.com is your #1 online tile retailer offering ceramic tile and all you need for your tile floors.