Home Wind Turbine: 3 Ways Yours Can Fail

The home wind turbine is great in a lot of ways but if you aren’t careful, you will fail at implementing them.

These are the 3 ways you can mess up a home wind turbine project…

Do not measure your home wind properly – This is a tremendous way to make a monumental error and cost yourself a lot of money. It is very necessary to understand the wind resources that you are dealing with. Everybody’s wind is a little bit different and if you don’t optimize this project for your particular wind conditions, then you stand a high likelihood of failure. It is simple enough to test the veracity of your home wind flow. All you really have to do is collect a little data at certain places around your house were you thinking may be able to install a wind turbine. The way to do that is with a small miniature imitation wind turbine device that is about the size of the palm of your hand. It is called an anemometer and you can tape it to a pole on your roof somewhere or to a longer pole in your backyard to simulate the wind turbine tower and let the device run for a couple of months and collect the data to later be analyzed. The data will lead you in the right direction as to where exactly the wind turbine should be positioned to get the most power out of it.

Do not check with your government about permitting – Many people have been stymied in their search for wind energy by not having checked beforehand with their city or neighborhood about the allowance of home wind turbine devices on their property. This is easy enough to do and the worst they can tell you is no, so it is better to go ahead and ask if you can install a wind turbine and if so, what kind you can install, before you get too deeply involved in this project.

Do not thoroughly look through your options – Many people get euphoric over the thought of installing a wind turbine of their house and they don’t do the proper checking about the types of wind turbine kits they could get and many of the other details that will determine the success the project. Therefore, taking a deep breath and slowing down long enough to get the facts right is an essential part of a project like this.

In summary, the home wind turbine can be a great thing, but like with any other home project, you have to get the details right or you could run yourself right into a ditch.

Roger G. Brown has saved myriad corporations hard earned cash on their electricity payments. View Roger’s tips on how to lower your expenses And also read more about Wind Turbine Kits.

Home Wind Turbine: 3 Steps You Must Take Before You Buy One

When you buy a home wind turbine is no different than any other home project. There are certain key steps that you need to take to understand which kind you need to buy.

Many people just jump right into this because they assumed that the wind surrounding their property will be sufficient for producing electricity. It would be nice if that were the case, but unfortunately the state of the technology now requires that you have at least 9 mph of wind on average to be able make a successful project.

Therefore, you have to do a little light reconnaissance work to get at that data and understand whether or not you fit in the category of someone who will benefit from such a device at home.

The 3 steps that you need to take before you buy a wind turbine for your house areā€¦

Analyze the amount of wind resources that you have to draw from-the easiest and usually the initial step here is to check out the resources of the federal government and their wind map. This government wind map will tell you if your particular area of the country has enough wind to support a power generation device at your house. The government’s wind map will stratify the entire country according to average wind speed. Although the strongest and most consistent winds tend to occur in the Midwest and on the coasts, as prices come down and technology improves, more and more of the country will be a fertile ground for wind turbine use.

Then, it makes the most sense to drive down another level and make sure that your particular property and specifically where you want to locate your wind device will have enough blowing wind throughout the day to support installing such a project. This can be done with an anemometer mounted in the proper location where you might put the wind turbine, in order to collect some data to later analyze for average wind speed. If you’re wind speed happens to correlate with what you learn from the government table, then you probably have a very good project if your wind speed is over 9 mph.

The second thing you must do is see if there are any permitting restrictions that might keep you from putting the wind turbine up-while this is changing there are some communities that still disapprove of renewable energy devices and the “look” they have on someone’s house. It could well be that you’re not totally prevented from doing a project like this, but you may be restricted in the type of turbine and in the location you place it.

The last thing to do is decide what you want to supply power for-the home wind turbine kits can be used to powered appliance like a refrigerator or freezer or, it can be a device to power your entire home. You just need to understand how much energy draw these things require and then match that up to the wind resources that you have available.

In summary, the home wind turbine can be a powerful device for you at your house and allow you to make a lot of electricity that you would otherwise have to buy. However it behooves you to study these project elements in detail before you begin and don’t leave any particular steps out in your rush to get things done.

Roger G. Brown has saved countless providers money on their electric power payments. Investigate Roger’s easy methods to reduce costs And even find out more on Home Wind Turbine